Page
12
of
25
10.
Master Output Level Control
This volume control adjusts the overall output level of the unit. It adjusts the
level to the internal loudspeakers, headphones, analogue outputs, AES3
output and the network audio outputs that are affected by it.
In its 12 O’clock position it is at unity gain.
Fully clockwise 10.6dB of gain will be applied to the output.
Fully anti-clockwise 30dB of loss will be applied to the output.
11.
Headphone Socket
This 6.35mm (1/4”) tip ring sleeve (TRS) jack socket provides a stereo output
for monitoring the mix/ solo buss.
Inserting a jack into this socket will cut the internal LS, the analogue and
AES3 audio outputs and any network audio outputs affected by the cut circuit.
It is suitable of use with headphones with impedances of 100
– 2000 Ohms.
12.
Right Panel Loudspeaker
This internal loudspeaker is fed audio from the right output of the mix/ solo mix
buss. The front panel overall level control adjusts its volume and the front
panel Cut & Dim switches also affect it.
There is a rear panel GPI that can turn the internal loudspeakers off.
Inserting a headphone jack in the headphone socket also turns the
loudspeaker off.
