Page
10
of
25
3.
Channel Output Routing
The output routing control is a 3 position toggle switch. It will route the
selected input(s) to the left/ right or both (left & right) mixes. The selected
input (left/ right channel) has a bearing on what is actually routed to the mix
circuits.
The table below shows the relationship between selected inputs to routed
outputs.
SWITCH
SETTINGS
Left Input
Both Inputs
Right Input
Left Out
Left input routed
to Left output
only
Left & Right
inputs mono’d
and routed to
Left output only
Right input
routed to Left
output only
Both Out
Left input routed
to both Left &
Right outputs
STEREO
Left input routed
to Left output
and Right input
routed to Right
output
Right input
routed to both
Left & Right
outputs
Right Out
Left input routed
to Right output
only
Left & Right
inputs mono’d
and routed to
Right output only
Right input
routed to Right
output only
4.
Input Select Switch
The 10
th
input channel has the option of taking its left & right audio inputs
either from the Dante/ AES67 audio network OR from a pair of local analogue
audio inputs on the rear of the unit.
5.
Dim Switch
When used this illuminated switch will dim both the front panel loudspeakers
and the analogue and AES3 outputs. It will also dim any of the network output
circuits that are after the dim control.
A rear panel GPI circuit also affects the state of this switch. If the rear GPI
circuit is made (i.e. on) then the switches internal LED will illuminate and
pressing the switch will not turn the dim on or off.
