![Glensound Electronics ISDN GSGC6 Скачать руководство пользователя страница 24](http://html1.mh-extra.com/html/glensound-electronics/isdn-gsgc6/isdn-gsgc6_manual_2231659024.webp)
G
GLENSOUND ELECTRONICS LTD
GLENSOUND ELECTRONICS LTD. 5, BROOKS PLACE, MAIDSTONE, KENT ME14 1HE TEL 01622 753662 FAX 01622
762330
Date 2nd July 1996
File AP72-07
Issue 4
GSGC6 1U TA/CODEC SPECIFICATION
AUDIO INPUTS
Input Impedance
> 15kohms electronically balanced
Line Up Level
'0' dBu
Normal Prog Peaks
'+8' dBu
Clip Point
'+13' dBu
Connectors
3 pin XLR fixed socket
AUDIO OUTPUTS
Output Impedance
45-55 ohms electronically balanced and floating
Line Up Level
'0' dBu
Connectors
3 pin XLR fixed plugs
POWER
Mains
210-250 volt AC Mains (105-125v by reconnecting the mains transformer)
Consumption
Less than 18VA
Insulation
Made to BS415 Class 2
Earthing
Mains earth is connected directly to the metalwork
An M4 earthing bolt is fitted to the rear panel
Connector
IEC fixed plug with retaining clip
ISDN CIRCUIT
Connector
RJ45
Line
Uses 1 or 2 (64Kbit/sec) B channels depending if 1 or 2 Codecs are fitted
Channel bonding is not implemented.
Standards
This equipment operates correctly with ISDN2 circuits which meet any one of
the following specifications:-
ETSI Euro ISDN (Net 3) BTNR 191 I 420
CODECS
Any 2 of 4 Different codecs can be fitted in this subrack. These are:-
1)
G722
Locking by Statistical Analyses
2)
APTX100
3)
DUAL ( G722 & APTX )
This automatically uses G722 or APTX algorithms depending on the codec
fitted at the other end of the ISDN circuit
4)
ISO/MPEG layer 2
This codec can operate using MPEG at 16, 24, 32 or 48 KHz sample frequency
or G722 at 16KHz sample frequency. It can be programmed from a terminal or
our GSGC7 to control it's mode of operation. For details see our GSGC7
instructions.
CODEC DATA RATE
All 4 Codecs operate at 64KBit/Sec data rate. Codecs 1 and 4 will operate
successfully as the 64KBit/Sec end of a programme that was originated at
56KBit/Sec
CODEC LINE UP
All codecs are aligned to send maximum digital code with +14dBu input
AUXILIARY DATA
When Codec 4 is fitted, an auxiliary RS232 data path becomes available to
other suitably equipped codecs.
Connector
9 pin D fixed socket to IBM PC standard
Baud Rate
Fixed at 9600
Compatibility
This data path is compatible with some other manufacturers codecs