AP72-01 Page 4 Issue 6
AT&V
Display Terminal Adaptor Configuration
Parameters: 0-2
This command will display the current configuration of the Terminal Adaptor.
AT&W
Save TA Configuration in NV-RAM
This command will save the current configuration of the Terminal Adaptor.
AT&Z
Store Telephone Number
Parameters:
x=nnnnnnnnnn
This command is used to store a telephone number into the Terminal Adaptor's
directory. The entry can be up to 20 characters long. The x parameter indicates into which
entry the number is to be stored and at present must be 0. The nnnnnnnnnn parameter is the
telephone number to store. See the ATDS=n command for details of how to dial a stored
number.
Example:
AT&Z0=0815436417. This will store the number 0815436417
into number store 0.
ATZ
Reset
ATZ will reset the Terminal Adaptor to user defaults.
AD
Additional
This is the prefix for all AD commands. Typing AD by itself (followed by a carriage
return) will result in the "OK" message being displayed and no other action being performed. It
is good practice to use this command to check that your terminal software is communicating
correctly. You should always receive the "OK" message.
ADB
Baud Rate
Default:
5
ADB1
600bps
ADB2
1200bps
ADB3
2400bps
ADB4
4800bps
ADB5
9600bps
ADB6
19200bps
