Glensound Electronics GS-MPI004, Руководство пользователя

Страница: 9 / 13

OPERATING INSTRUCTIONS
SETUP
To setup the GS-MPI004 beltpack unit ready for use:
1. Screw suitable antenna onto SMA Bulkhead antenna connector.
2. Insert SIM card
upside down into slot, following directions
given in the previous chapter.
3. Place 4xAA batteries into battery holder, and / or connect
external DC supply.
4. Turn unit on.
5. If sounder LED starts flashing, type in SIM PIN code.
6. Wait for red ON-HOOK LED to stop flashing, indicating that the
GSM unit has successfully registered with the GSM network.
(GS-MPI004 unit is now ready for use)
To setup the GS-MPI005 subrack unit ready for use:
1. Screw suitable antenna onto each SMA Bulkhead antenna
connector, as required.
2. Insert each SIM card upside down into slot, as required,
following directions given in the previous chapter.
3. Connect subrack unit to mains supply.
4. If any sounder LEDs start flashing, type in SIM PIN code.
5. Wait for all red ON-HOOK LEDs to stop flashing, indicating
that each GSM unit has successfully registered with the GSM
network.
(GS-MPI005 unit is now ready for use)
DIALLING
1. Type in phone number on keypad. Press the red “HANG-UP”
button and start again if the number was entered incorrectly.
2. Press the green “DIAL” button.
(ON-HOOK LED will turn off and OFF-HOOK LED will start to
flash, indicating that the phone is off-hook, and waiting for the
phone at the other end to start ringing)
(Phone will return to on-hook condition if call fails. Otherwise,
when remote phone starts ringing, the sounder will play a slow
ringing cadence, and the OFF-HOOK LED will flash in-time
with the cadence)
(When remote phone is picked up, OFF-HOOK LED will turn on
solid)
GS-MPI004 / 5 Manual – Issue 2 9