Glensound Electronics GS-MPI004, Руководство пользователя

Страница: 8 / 13

phone will go off-hook and dial the number. If no valid phone number is stored in
the selected memory slot, the sounder will give an indication of input error.
Note that the phone book stored on the SIM card is not accessible.
SIM CARD
Each mobile phone unit requires a separate SIM card. The SIM card must be
inserted
upside down into the horizontal slot on the front panel, with the mitred
corner facing forwards, and the gold-plated contacts facing upwards. The SIM
card should be pressed in using a finger nail until it latches.. It can be removed by
pressing with the finger nail until it unlatches.
Note that the phone book stored on the SIM card is not accessible.
PIN CODE
When the mobile phone unit is turned on, it will check whether the PIN code on
the SIM card is enabled or not, and will prompt the user accordingly (as described
in the
“Visual Interface” section, above. The mobile phone cannot be used to
activate, deactivate, or change the SIM PIN. These actions should be performed by
placing the SIM card in a standard mobile phone.
AUTO-ANSWER
By default, the mobile phone will not attempt to automatically answer an incoming
call. However, each mobile phone can be separately configured to automatically
answer after 1 – 9 rings. To achieve this, hold down the appropriate keypad button
(0 – 9) while powering on the unit. This will configure the phone to auto-answer at
the beginning of the
n th ring, where n is the number of the keypad button held
down. If n is 0, auto-answering will be disabled. The auto-answer setting is
stored, and recalled when the power is next turned on.
Note that many GSM networks activate a remote answering service after a fixed
number of rings. The auto-answer setting is unable to affect this, however the
GSM network provider may disable the remote answering service on request.
SOUNDER
Each mobile phone unit has a simplistic sounder, which provides ringing cadences
and indication of input error. The sounder can be toggled on and off using a push-
button on the front of the panel. The on/off state of the sounder is stored, and
recalled when the power is next turned on.
GS-MPI004 / 5 Manual – Issue 2 8