BEFORE installing your
HoseMaster
, consider the following three points:
L
OCATION FOR THE
H
OSE
M
ASTER
:
The first step in determining where to install your
HoseMaster
should be finding a suitable space where the
HoseMaster
will fit. The HoseMaster has been designed to fit in the most space-challenged areas of your yacht. The photo
at right shows one possible instal-
lation. The typical size require-
ment for the
HoseMaster
is 14.00”
deep x 13.00” high x 12.00” wide.
Perhaps the easiest location for
the
HoseMaster
to be installed is
in a storage bay that is near the
boat’s water supply. The
HoseMaster
may also be located
away from the water supply area
by using a length of water hose
routed from the water supply line
to the HoseMaster (included in
optional installation kit).
W
ATER
H
OSE
E
XIT
:
The second step is determining where the water hose will exit the exterior of your boat. In
some cases it may be preferrable for the water hose to exit
the aft through a hawse pipe, while in other applications it
may be necessary to exit the side. One option also available
would be to have the water hose installed in a storage com-
partment on the aft deck (see photo at left). In either case, a
route must be identified that the hose will take from where it
is stored to the outside of your boat.
C
ONNECTION TO THE
B
OAT
’
S
W
ATER
S
YSTEM
:
Connecting the
HoseMaster
to the boat’s water system is very simple. In retrofits, simply route the existing hose line from
the ship’s water system inlet port to where you have installed the
HoseMaster
. Cut the hose at a suitable length and attach
a 1/2” NPT female connector. Attach the female connector to the 1/2” NPT male water hose inlet, located in the center of
the main pulley wheel of the
HoseMaster
. If you prefer to replace your existing hose with a new one, then route a length
of approved 5/8” water hose from your ship’s water system inlet port to the
HoseMaster
water outlet port and connect as
described above (see drawing below).
3
B
EFORE
I
NSTALLING THE
H
OSE
M
ASTER
A
1
2
3
The HoseMaster’s compact size allows previously
unusable space to be functional
Aft Exit
1/2” - 90deg. brass female union
Hook up to boat
water system
5/8” - IAMPO
approved hose
Shown with
HoseMaster
installation kit
PN 0551x
T
OPMOUNT
C
ONFIGURATION
8
B
OTTOM MOUNT
C
ONFIGURATION
W
ALL MOUNT
C
ONFIGURATION
W
ARRANTY
PRODUCT COVERED BY THIS LIMITED WARRANTY: HoseMaster
1.
GLENDINNING MARINE PRODUCTS, INC.
warrants to the original consumer purchaser that the
HoseMaster
will be free
from defects in material and workmanship under normal use and service for a period of one (1) year from the date of pur-
chase.
2.
This LIMITED WARRANTY applies to
defects in material and workmanship. It does not apply to plated or painted finishes
or to hose damage caused by inadequate hose storage area or installation not in accordance with GLENDINNING MARINE
PRODUCTS, INC. specifications.
3.
This LIMITED WARRANTY is void
if the product has been damaged by accident or unreasonable use, neglect, improper
installation, or other causes not arising out of defects in material or workmanship.
4.
To obtain performance of this LIMITED WARRANTY
obligation the original purchaser should contact GLENDINNING
MARINE PRODUCTS, INC. for instructions concerning removal and shipping of the defective component. Upon compliance of
the foregoing procedure all warranted defects will be repaired, or at GLENDINNING MARINE PRODUCTS, INC. option, the
complete unit replaced and returned to the consumer, shipping charges prepaid.
5.
GLENDINNING MARINE PRODUCTS, INC.
does not assume the costs of removal and/or installation of the product or any
other incidental costs which may arise as a result of any defect in materials or workmanship.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ANY WARRANTY IMPLIED BY LAW INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS, IS IN EFFECT ONLY FOR THE DURATION OF THE EXPRESS WAR-
RANTIES SET FORTH IN THE FIRST PARAGRAPH ABOVE. NO REPRESENTATIVE OR PERSON IS AUTHORIZED TO GIVE
ANY OTHER WARRANTY OR TO ASSUME FOR GLENDINNING MARINE PRODUCTS, INC. ANY OTHER LIABILITY IN CON-
NECTION WITH THE SALE OF IT’S PRODUCTS. GLENDINNING MARINE PRODUCTS, INC. WILL NOT BE LIABLE FOR ANY
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR INSTALLATION OF IT’S PRODUCTS.
