@ C T I V E L I N K M O D U L E
PN 9110.01417 REV 1.0 Release Date
2 of 8
© 2000 Glenayre Electronics,
2.
Place two AAA alkaline batteries into the battery compartment, aligning the + and -
symbols on the batteries with the symbols in the battery compartment.
3.
Align the door with the slots at the back of the Module and clip the door smoothly into
place. Do not force. If you feel resistance, check to ensure the batteries are seated properly
in the compartment.
When battery power is low, the module’s red LED will flash quickly. Use this same procedure to
replace the batteries.
