background image

 

FUNCTION SWITCH KNOB

 

                              (ON SOME MODELS ONLY) 

The            setting turns on the light inside the oven during normal   
Operation. 
The            setting turns on the light and

 

the turnspit inside 

the oven during normal operation. 

 

                              6 KEYS ELECTRONIC TIMER 

(ON SOME MODELS ONLY) 

Digital clock 

-      Showing time:(0:00-24:00) and minutes.   
-     

The screen shows 3 glittery number and “

AUTO

” if the power is on.   

-      In order to set the correct time, press the        button first, then + or - button   
to carry forward or backward the figure until the exact time shows. 

Manual operation setting

(

only available on the electric grill) 

Press the             

button to remove the flashing of “

AUTO

”. 

If 

“auto” is flashing (automatic or semi automatic program has been set),press                 

button to remove 

AUTO

” and then the manual operation process is on. 

Automatic setting (set the time of full automatic starting and ending,

 

only available on the electric grill) 

1.  press          button, set roast time; 
2.  press          button, set roast finish time; 
3.    set temperatures and roast modes by turning the thermostat knob and selector knob. 
After the above setting, “

AUTO

” will be glittering, which means the roast process of the oven is set. 

For example:

 if roast time takes 45 minutes and expect it will end at 14:00. 

Press,            the roast time is to be 45 minutes; 
Press,            the roast is set to end at 14:00. 
After the above setting, the screen shows the real time(hour

minute)and flashing 

AUTO

”, it means the set 

roast process is memorized automatically. 
When the clock turns to be 13:15(or between 13:14-13:15), the oven will start automatically. 
In the roast time,            and 

AUTO

” will be always flashing. 

when the clock turns to be 14, the roast has been finished automatically. The alarm will ring and “

AUTO

” will   

flash, press the        button and the ringing will stop. 

Semi-automatic  setting  (set  the  time  of  automatic  starting  and  ending

only  available  on  the  electric 

grill)

   

A.      set the time limit of roast (10 hours maximum): 
press the              button to set the time of roast; 
the oven starts immediately,         

and “

AUTO

” will flash. After the roast is finished, the roast operation 

process  will  be  shut  automatically.  Then 

AUTO

”  flashes,  the  alarm  rings.  The  ringing  will  stop  after  the       

button is

 

pressed.

 

B.    Set the time of ending (23 hours 59 minutes maximum): 
press the          button to set the time of ending; 
the oven starts immediately,            and 

AUTO

” will flash. When the set time of ending is reached, the roast 

process will shut automatically. Then 

AUTO

” flashes, the alarm rings.    The ringing will stop after the      button 

is Pressed. 
when  the  related  button  is  pressed,  the  set  roast  process  will  be  displayed.  Whenever  the          button  is 
pressed,  and  set  backward  the  time  to  “

0

”,the  set  roast  process  will  be  cancelled.  When            button  is 

pressed again, the oven will revert to the manual operation process. 

Timer   

23 hours 59 minutes can be set as maximum. 
TO set the time, press the          button, and then + or - button, until the required time is shown on the screen. 
After the setting, the correct time (hour, minute) and the        button will show on the screen. When the         
 

Содержание GL 662 Gas

















Отзывы: