Assembling the Juicer
Place the juicing bowl onto the motor base with the
centre hub over shaft of base. When connecting
the juicing bowl to the motor base, ensure that the
3 holes in the bottom of the juicing bowl align with
the 3 lugs of the motor & rest properly.
Install strainer assembly (the triangle mark on the
strainer assembly must be aligned with the one on
the bowl marking triangle/unlock).
Arrow is at the top of the strainer and the arrow is
at front on bowl which is to align.
Align juice squeezing screw with the centre of
strainer assembly & then rotate a little and insert it
downward.
Strainer Assembly and Auger if not fixed properly
the feeding tube will not lock and the juicer will not
start, so fix the same properly.
Align the triangle on the feeding tube with the
unlock mark on the juicer bowl, then rotate
clockwise, align the triangle with the lock mark so
it, is completely locked. Otherwise it will not start.
Place the container on the both sides of juice outlet
and pulp outlet, put pusher on. The juicer is now
ready.
Do not put finger, spoon or chopsticks and other
things into the inlet of feeding tube.
Press Button“ON/OFF”when food is processed
and no more juice flow out. After the motor and
screw stop completely, take the juice cup away
from juice outlet and slag door.
Juice Outlet Cap Assembly
This is fixed & adjustable by sliding it can be
closed then juice collect in bowl & can be released
in one go & can also be used for mix juicing.
Fresh fruit juice is recommended to drink as soon
as possible, exposed to the air a long time, taste
and nutritional value will be affected.
ON
REV
BUTTON SWITCH FUNCTION
ON
Press to start the juicer.
OFF
To stop the juicer.
REV
Press & hold if some thing
is stuck & you need to unclog.
IMPORTANT:
If the juicing bowl and lid are not
correctly assembled, the juice press will not
operate. This is a safety feature.
ONCE ALL THE PARTS ARE ASSEMBLED
FIRMLY. THEN PLUG THE CORD INTO AN
ELECTRICAL OUTLET.
Do not pre-operate before adding materials or do
not operate with an empty bowl.
Using your juice press
Clean fruit and/or vegetables thoroughly, for
juicing. If juicing fruit with hard seeds, pit the fruit.
Remove any hard inedible skins, i.e. skin of
melons, pineapples and mangoes prior to juicing.
If citrus fruits are being used, remove the skin prior
to juicing.
For oversized pieces of fruit and/or vegetables, cut
the food into small pieces that fit into the feeding
tube and insert it through the feed tube.
Press the food pusher slowly down until all fruit or
vegetables have gone through the juice press. Do
not exert too much pressure on the pusher, as this
could affect the quality of the end result and it
could damage the unit.
Pull the
button up
JUICING FULL APPLE/ORANGE
(medium size)
Pull the button up when to squeeze full apple,
orange & big ingredient. Put the fruit in centre & fill
to flip it into feeding tube.
Press down the button, and lock swivel bracket
when squeeze small volume of fruits such as
tomatoes cut pcs, peeled pomegranate etc., then
put the ingredients into feed inlet.
Press down
the button
base unit
