Glen Dimplex Belling 110DF, Руководство по обслуживанию

Страница: 47 / 82

Conversion Instructions
To convert the hotplate burners
a) Remove the pan supports
b) Remove the burner caps and burner heads
c) Unscrew the existing injectors from the hotplate burner bowls
d) Replace with the injectors supplied in the conversion kit as detailed in the tables on
the previous page.
Note: when converting the wok burner, it is necessary to replace the two injectors, the
inner and outer. The outer injector is visible on removal of the cover plate.
UK / Europe / Russia
To convert the gas tap bypass screws
a) Remove the hotplate control knobs springs and bezels
b) Using a small flat bladed screwdriver, each bypass screw can be accessed
via the hole in the inner fascia panel
c) NG to LP - Turn each bypass screw fully clockwise until it stops.
Do not over tighten
d) LP to NG – Turn each bypass screw anti-clockwise until a small, stable
flame is maintained when the control is turned to simmer.
The flame must not be extinguished when wafted.
e) Refit the control bezels, springs and control knobs.
Conversion labels
Conversion to LP (excluding Germany)
After conversion, affix the label supplied with the conversion kit
PER/FOR G30/G31 adjacent to the appliance data badge
Conversion LP Germany
After conversion, affix the label supplied with the conversion kit
PER/FOR G30/31@50mbar adjacent to the appliance data badge
Conversion to NG
After conversion, affix the label supplied with the conversion kit
PER/FOR G20 adjacent to the appliance data badge
44