INSTALLING THE ANTI TILT BRACKETS
Install the legs to the cooker and adjust the height to the desired level. Make sure that this
height is absolutely correct to what you require.
1. On the rear of the cooker there is a covering panel. Accurately measure the distance from the
top of this panel to the floor Height
H
.
2. Mark the same height on the wall against which the cooker is to be installed.
3. Mark the centre of the cooker at the same height on the wall.
4. At a distance of 150mm either side of the centre at the measured height mount the two anti
tilt brackets supplied onto the wall.
5. Slide the cooker into position after connecting the chain. The brackets prevent any chance of
the cooker tilting forward.
H
Slide cooker
under brackets
Rear view showing the anti tilt brackets attached to the wall.
Side view showing the anti tilt brackets attached to the wall.
7
H
300
Brackets mount onto the wall at height
H
so
the rear panel on the cooker slides under
the brackets
Some models have a safety chain
included. Use the supplied wall hook or similar
to hook the centre of the chain onto the wall.
