background image

Page 6

1.   We  only  do  business  upon  the  Conditions  which  appear  below  and  no  other.    Unless  we  so  agree  in 
writing these Conditions shall apply in full to any supply of goods by us to the exclusion of any Conditions 
or terms sought to be imposed by any purchaser.  These Conditions of Sale and Warranty Terms override 
those  which  are  contained  on  the  Invoice  Forms  and  all  Sales  are  now  subject  to  these  Conditions  of 
Sale and Warranty terms only.

2.  PRICE
Once an order or call off has been accepted the price will be held for three months but if delivery is extended 
beyond  that  period  at  the  customer’s  request,  then  we  reserve  the  right  to  amend  the  price  when 
necessary
.  The company reviews its pricing annually to adjust for changes in our cost base.  We reserve the 
right to alter prices at any time for severe movements in raw materials (mainly copper and steel).  If there is 
to be a change we will give customers at least thirteen weeks notice but anything delivered after that date 
will be at the revised price.  An order may not be cancelled or varied after acceptance without the written 
consent of the company.  Such cancellation or variation shall be subject to such reasonable charges as may 
be appropriate.

3.  SPECIFICATION
The  goods  are  supplied  in  accordance  with  the  Specifications  (if  any)  submitted  to  the  Purchaser  and 
any  additions  and  alterations  shall  be  the  subject  of  an  extra  charge.    Any  goods  not  so  specified  shall 
be  in  accordance  with  our  printed  literature  or  the  literature  of  any  of  our  component  suppliers  (subject 
to  any  modifications  made  since  publication).    If  we  adopt  any  changes  in  construction  or  design  of 
the  goods,  or  in  the  specification  printed  in  our  literature,  the  Purchaser  shall  accept  the  goods  so 
changed in fulfilment of the order.

4.  PAYMENT
The invoice price of goods shall be payable within 30 days of despatch by us of our invoice for the goods or such 
longer time as may be stated by our quotation or invoice.  If we receive payment in full on or before the due date 
we will allow an appropriate settlement discount except where we have quoted a special net price.  If payment 
is not received in full on or before the due date we shall be entitled in addition to the invoice price to:
(i)  payment of a sum equal to any increase in the copper price supplement applicable to the particular goods 
sold between the date of receipt of order and the date of receipt of payment in full; and 
(ii)  interest on any part of the invoice price unpaid after the due date at the rate of 3% per annum over the 
base rate for the time being of HSBC Bank plc.

5.  TIME
We give estimates of delivery dates in good faith and time of delivery is not nor shall be made of the essence of 
any contract nor shall we be liable for any loss or damage occasioned by delay in delivery.

6.  DELIVERY
We deliver free normally by our own vehicles within 25 miles of any of our manufacturing depots.  Delivery to 
any place more than 25 miles from one of our manufacturing depots is subject to our quoted delivery charges.  
We reserve the right to make delivery of goods contained in one order by more than one consignment and 
at different times.  Where a period is agreed for delivery and such period is not extended by our Agreement, 
the  Purchaser  shall  take  delivery  within  that  period.        If  the  Purchaser  fails  to  take  delivery,  we  shall  be 
entitled  at  the  Purchaser's  risk  and  expense  to  store  the  goods  at  the  Purchaser's  premises  or  elsewhere 
and  to  demand  payment  as  if  they  had  been  despatched.    Off  loading  at  point  of  delivery  shall  be  the 
responsibility of and be undertaken by the Purchaser.

7.  SHORTAGES OR DAMAGE
Goods must be inspected before signature of delivery note and any damage, shortage or discrepancy noted on 
the delivery note and the goods returned on the same vehicle.  The buyer must also give us immediate written 
notice of the damage, shortage or discrepancy so that we may prompt investigation.

8. RETURN OF GOODS
Goods may not be returned to the Company except by prior written permission of an authorised officer of 
the Company and such return shall be subject to payment by the Purchaser of handling and re-stocking 
charges, transport and all other costs incurred by the Company.

 9. COMPANY LIABILITY
All  our  goods  are  made  of  the  best  materials  from  reputable  manufacturers  and  where  stated  are 
manufactured  to  the  appropriate  British  Standard.    Complaints  must  be  given  to  us  immediately,  before 
any  action  is  taken,  as  responsibility  cannot  be  accepted  if  repairs  or  renewals  are  attempted  on  site 
without our written authority.  

Defects  caused  by  corrosion  or  scale  deposits  are  not  covered  by  this  guarantee  save  as  expressly 
provided in paragraph (4) of this Condition 9.

Where we agree to rectify any defect, we reserve the right to undertake the work on our own premises.  
The following guarantee covers faulty materials and manufacture for the stated period, provided that:-
•  The unit has been installed in accordance with our installation and service instructions and all relevant codes 

of practice and regulations in force at the time of installation.

•  That all necessary inlet controls and safety valves have been fitted correctly.
•  It has only been used for the storage of potable water supplied from the public mains.
•  Where appropriate the unit has been regularly maintained as detailed in the installation and service 

instructions.

(1) Domestic and Commercial Open Vented Cylinders and Tanks.
If  the  copper  cylinder  or  tank  or  any  integral  pipework  proves  to  be  defective  either  in  materials  or 
workmanship, we will either repair or supply replacement at our option with the closest substitute in the 
case of any obsolete product to any address in Great Britain.
(a)  free of all charge during the first year after delivery by us.
(b)  thereafter at a charge of one-tenth of the then current list price and any copper price supplement and 
delivery charge during the second year after delivery by us and increasing by a further one-tenth on the second 
and subsequent anniversary of delivery by us.

Gledhill

 (Water Storage) 

Ltd

AND  FURTHER  we  will  meet  the  contractors/installers 
reasonable  costs  in  removing  and  replacing  any  defective 
Open Vented Copper Cylinder or Tank with defective integral 
pipework as follows:
(i)    in  the  case  of  vessels  of  less  than  80  imperial  gallons 
capacity up to a maximum of one-half of the extent of our 
liability in regard to the replacement product expressed in 
(1) (a) and (b) above 
ii)    in  the  case  of  vessels  larger  than  79  imperial  gallons 
capacity up to a maximum of one-quarter of the extent of our 
liability in regard to the replacement product as expressed 
in paragraphs (1) (a) and (b) above.
(2)  Domestic Mains Fed Products
 If the copper storage vessel itself or any integral pipework 
as part of the storage vessel assembly proves to be defective 
either in materials or workmanship, we reserve the right to 
either repair or supply replacements or the closest possible 
substitute in the case of any obsolete product and will collect 
and deliver to any address in England, Wales and Scotland 
(excluding all Scottish Islands).
(a)  free  of  all  charge  during  the  first  year  after  delivery 
by us.
(b) thereafter at a charge of one-fifth of the then current list 
price or any copper price supplement and delivery charge 
during the second year after delivery by us increasing by a 
further one-fifth on the second and subsequent anniversary 
of delivery by us.
AND  FURTHER  we  will  meet  the  contractors/installers 
reasonable  costs  in  removing  and  replacing  any  defective 
copper  storage  vessel  or  storage  vessel  with  defective 
integral pipework from the Domestic Mains Pressure Range 
of products up to a maximum of one-third of the extent of 
our liability in regard to the replacement product expressed 
in (2) (a) and (b) above.
(3)   Integrated Boiler and Storage Vessel Products and 
Stand Alone Boilers
In the case of the GulfStream range of products and the 
Gledhill boiler range of products,  Gledhill guarantees the heat 
exchanger (boiler) for material and construction faults for two 
years  and  FURTHER  we  will  meet  the  installer/contractors 
reasonable costs in removing and replacing any DEFECTIVE 
heat exchanger up to a MAXIMUM of one third of the extent 
of our liability in regard to the replacement product.
THE RESPONSIBILITY FOR THE EXECUTION OF THIS
GUARANTEE LIES WITH THE INSTALLER.
The guarantee becomes null and void if the appliance is used 
incorrectly,  or  in  the  event  of  proven  negligence  or  incor-
rectly  implemented  repairs  OR  FAILURE TO  CARRY  OUT 
THE

   RECOMMENDED INSPECTION/MAINTENANCE.   The 

guarantee  also becomes null and void if changes are made to 
the appliance without our knowledge, or if the serial number 
on the appliance is removed or made illegible.
The  annual  service  must  be  carried  out  by  a  competent 
installer in accordance with the advice given by Gledhill and 
using Gledhill approved parts.
(4)  Components of our products other than Storage 
Vessels and Integral Pipework.  
We will either extend to the purchaser the same terms of war-
ranty as we are given by the manufacturer of the component or 
if the manufacturer does not give any warranty, replace free of 
charge any component which becomes defective within twelve 
months after the date of the delivery by us and is returned to 
us at the purchaser’s expense but we shall not meet the cost of 
removal or shipping or return of the component or any other 
cost charges or damages incurred by the purchaser.
If the appliance manufactured by Gledhill incorporates a fac-
tory fitted scale inhibitor then during the period of three years 
from the date of delivery Gledhill will replace, free of charge, 
any plate heat exchanger fitted in the appliance as original 
equipment in which scale formation occurs that materially 
reduces the effectiveness of the plate heat exchanger.  This 
guarantee does not extend to any other component installed 
within the Gledhill appliance or elsewhere in the Purchasers 
domestic water system.
(5) General
In the case of goods manufactured solely in accordance with 
our specification and designs and in respect of any installation 
work carried out by or on our behalf, our entire liability and 
the  purchaser's  sole  remedies  (subject  to  (1-4)  above)  and 
shall be as follows:

AMD.  MAY 2006

CONDITIONS OF SALE & WARRANTY TERMS

Содержание PCA 200 - SOL









Отзывы: