GLD Products
727 Dartboard
Item 42-1010
7
1-800-225-7593
www.gldproducts.com
Create the Toe Line
Place a toe line 96" from the face of the board for the throwing distance. Adhesive tape or
masking tape, 2 feet long by 2-1/2" wide, may be used. GLD Products offers a Viper
Throwing Line and a Dart Mat for this purpose. Refer to the parts order form at the back of
this manual.
POWER INSTALLATION
The dartboard is designed to be powered by two AA batteries. The battery compartment is
located on the front of the dart board.
Always install the correct size and grade of battery suitable for the intended use. Replace all
batteries of a set at the same time, taking care not to mix old and new ones, or batteries of
different types. Clean the battery contacts and also those of the device prior to battery
installation. Ensure the batteries are installed correctly with regard to polarity (+and -).
Remove batteries from equipment which is not to be used for an extended period of time.
Remove used batteries promptly.
For energy saving purposes, this dartboard is equipped with auto sleep and auto power off
mode. If the dartboard is not being played, it will automatically go into sleep mode after 3
minutes. If it hasn’t been played for 30 minutes, it will automatically power off.
7"
68"
To Floor
Bullseye
Keyhole Slots
5.5"
2.75"
Содержание 727
Страница 28: ...This page left blank intentionally ...