4
Installing a Tri-View
Recessed
Mirrored Cabinet
A.
Determine the rough opening for the cabinet. Refer to
“R.O.” formula chart on page 3. Opening must be plumb
and level.
B.
Cabinet can be hinged on left or right. Simply flip the
cabinet to change hinge location. REMINDER- The doors
are shipped installed on the cabinet. Remove the doors
before working with the cabinet for any type of installa-
tion. Simply lift the snap plat e in the inside edge of the
hinge and lift out of the Hinge toe. ( See page 9 for hinge
diagrams.) PLACE THE DOORS IN A SAFE AREA ON A
PIECE OF CARPET WITH CARDBOARD IN BETWEEN
EACH DOOR TO AVOID DAMAGE AND SCRATCHES.
C
. Insert cabinet in R.O. and center, Cabinet Flange cov-
ers any space in the R.O. around the cabinet and should
cover the finished surfaces--Sheetrock and/or tile.
Install the cabinet with four (4) #10 x 1 1/2” wood screws
(supplied). Use the pre-punched holes above and below
the hinge plates (as shown). Do not overtighten. Cover
screws with four screw caps (part #434).
A
