Glaser-Dirks DG-800 A, Руководство по эксплуатации самолета

Страница: 90 / 110

Flight manual DG-800
Issued: Oktober 2004 TN 873/32 7.11
44) Outside air temperature OAT indication (Option).
Switch No. 43 to the left: OAT in °C is displayed on the right display.
Note: If the option is not installed and you press switch No. 43 to the left
nothing will be displayed on the right display.
45) Display for the fuel level in the fuselage tank in liters.
Fuel Liter
The amount displayed is the total amount in the tank less 0.5l
(0.13 U.S.gal.) unusable amount. When reaching the non usable amount of
fuel LL will be displayed and the display starts blinking.
46) Display for the engine speed x 10
engine speed RPM x 10
e.g.
6 0 2
means 6020 RPM engine speed. When exceeding the max.
continuos engine speed of 6100 RPM a blinking double point will appear in
front of the last digit, e.g.
6 1:1
.
When exceeding the max. engine speed of 6800 RPM the whole display
starts blinking
6 8:1
.
After switching off the ignition (DEI still switched on) 3 dashes will be
displayed
- - -
.
As soon as the propeller is aligned or the ignition is switched on again, the
engine speed will be displayed.
- - -
shows that the DEI is working in the sequence which controls the
optional electric propellerbrake (item 34) even if this option is not installed.
Caution: If 0 0 0 is displayed instead of the engine RPM the proximity switch
at the upper drive belt pulley is defective (short circuit in the switch).
With this defect the control light 41 will not work and the automatic retraction
of the engine will not be activated.
You have to retract the engine with the manual switch.
A new proximity switch must be installed prior to the next engine start.