KIT CONTENTS:
ITEM 1 - M10 x 140mm Carriage Bolt
x 10
ITEM 2 - Central Support Beam
x 1
ITEM 3 - Table Top Assembly
x 1
ITEM 4 - Angled Support Beam
x 2
ITEM 5 - M10 x 150mm Carriage Bolt
x 2
ITEM 6 - M10 Washer
x 38
ITEM 7 - M10 Nyloc Nut
x 38
ITEM 8 - M10 x 100mm Carriage Bolt
x 2
ITEM 9 - Support Cross Bar
x 2
ITEM 10 - Seat Leg
x 4
ITEM 11 - M10 x 120mm Carriage Bolt
x 24
ITEM 12 - Seat Pan Assembly
x 2
ITEM 13 - Seat Leg Support
x 4
EQUIPMENT REQUIRED:
- 17mm Socket
x 1
- Socket Driver
x 1
- Socket Extension
x 1
- Lump Hammer / Nylon Faced Hammer x 1
DIAGRAM NOT TO SCALE
5
2
3
8
IMPORTANT NOTE:
Fixings should be driven in through the small
hole in each frame component. The rear hole
features a counterbore to accommodate a
washer and nut to secure each fixing in place.
Take care to ensure each part is oriented
correctly at each stage as per each assembly
drawing.
6
7
1
4
9
small hole
hole with
counterbore
10
11
13
12
Assembly requires a
minimum of 2 x people
EXAMPLE
2 of 8
5
