Glardon EnSet Compact, Руководство пользователя

Страница: 24 / 40

EnSet
©
Plus / Original / Compact
Version 03 - 15.10.2018
24/40
5.3 Tuning the EnSet
©
Units for Optimum Air Pressure
Through Full Range of Speeds
No. Description
(A)
Turn air pressure on machine to 32 psi (2.20 bar).
(B)
On EnSet
©
Original or Compact unit:
Turn knurled knob (9) to increase or decrease pressure.
(C)
On EnSet
©
Plus unit:
Make sure the « Pressure Mode » is selected when tuning the EnSet
©
Plus.
Press « + » or « - » button (9) to right of Pressure window to increase or
decrease air pressure.
(D)
Hold the handpiece in the hand.
(E) Step on foot pedal and press until pedal is completely engaged (all the way to
floor).
(F)
Continue to hold foot pedal down.
(G)
While holding foot pedal slowly increase pressure up to 65 psi (4.48 bar).
Watch the air pressure on the gauge (8) for EnSet
©
Compact and Original or
in the Pressure window (8) for EnSet
©
Plus.
Notice where the handpiece has crisp powerful taps and where the power
starts to fall off. There is a pressure around 40-50 psi where there is good
power and crisp tapping at the fastest speed (foot pedal to floor). Once the air
pressure gets too high the power of the impacts starts to decrease at the
highest speed.
Dial the air pressure back down to the range where you have the best power
through the high speed range.
(H) This will give you an optimum air pressure to have excellent power through
the entire speed range of the tool.
If you need increased power especially on the slower speed then you may dial
the air pressure up to 100 psi (7 bar). This will give you very powerful impacts
on the slow speed needed for setting gold, punch dot backgrounds or for
sculpting/heavy work especially when paired with the heaviest striker head
(12 grams).