Glamoriser INSTANT AUTOCURLER, Руководство пользователя

Страница: 7 / 18

EN
KEY FEATURES:
• Create glamorous curls easily at the touch of a button -
automatic rotating barrel creates curls effortlessly in seconds
• Variable heat and LCD display - easy to use display and
variable heats from 80°C to 210°C perfect for every hair type
• Black Diamond Oil infused barrel - for ultimate shine and
luminescence
• Variable time & curl direction settings - choose the
appropriate setting for your hair type for long-lasting curl
impact
• Cool to touch housing
• Fast heat up and heat ready indicator
• Easy clean function
• Auto shut-off after 60 minutes
• 3m salon length cord for fuss free styling
• UK/EU adaptor plug
OPERATING INSTRUCTIONS:
Turn on the curler by plugging into the mains power and
pressing the power button located on the side of the handle.
Select the desired temperature by pressing the + and –
buttons also located on the side of the handle. Always start
with the lowest heat setting and increase gradually until you
achieve your desired results for your hair type. Once you have
selected your desired heat setting press the ‘M’ button located
on the side of the handle. The screen will now only show
the curl time. Use the + and – buttons to select the desired
curl time. You can choose between 8, 10, 12 and 15 seconds.
Always start with the lowest curl time and increase until you
achieve your desired result for your hair type. Once you have
selected all desired settings press the power button for the
padlock image to appear on the screen and lock the settings.
Please note this product will automatically lock after 15
seconds. To unlock simply press the power button.
If at any point the curler begins to beep continuously or the
screen says ‘reset’ turn the product off and back on. The
product will reset and be ready to use again.
To turn the product off, hold down the power button until the
screen switches off.
INSTRUCTIONS FOR USE:
Before styling, make sure hair is clean, dry and tangle-free.
Divide the hair into 2cm / 1 inch sections. For tighter curls
use smaller sections, for looser curls and waves use larger
sections.
Ensure the large ‘U’ shaped slit opening of the product is
facing away from you.
Starting with the under layers of hair, select a section of hair
and place horizontally in the top of the barrel, holding hair at
the ends
Once hair is in the correct position select a directional button
located at the top of the handle. You can choose from two
directional buttons, which will create a curl either towards
or away from your face. Allow hair to be taken into the barrel
smoothly and continue to press down directional button until
the barrel stops spinning. Keep hair in the barrel until you hear
4 beeps. Once you have heard the 4 beeps simply pull the
barrel in a downward motion away from your head to release
the curl. Arrange curl into place with your fingers.
CLEANING AND MAINTENANCE:
Ensure the product is fully cool before cleaning.
To clean excess styling product and residue from the inside
of the auto curler and barrel, use the auto curl cleaning tool
provided. Insert the cleaning tool into the curling chamber in
the correct position ensuring the cleaning tool is secure, not
loose (see diagram).
Turn on the auto curler by pressing the power button, the
screen will show the letters ‘CLA’ to show it is in cleaning
mode.
The auto curler will not heat up when the cleaning tool is in
place.
Press the left or right arrow buttons once, the barrel will begin
to rotate and change direction. Once the barrel has stopped
rotating, the product has finished cleaning.
Hold down the power button to turn the product off.
It is recommended to clean this product once a week.
Clean the outer housing surface with a damp cloth
IMPORTANT INSTRUCTIONS: SAFETY CAUTIONS
WARNING – FOR ADDITIONAL PROTECTION THE
INSTALLATION OF A RESIDUAL CURRENT DEVICE (RCD)