Glam Rock GK1003, Инструкция по эксплуатации

Страница: 3 / 25

4 5
Adjusting the chronograph hands to zero position
1. Pull out the crown to position III (all three chronograph hands are in their correct or incorrect
zero position).
2. Keep pusher 2 and 1 depressed simultaneously for at least 2 seconds (the center stop-second
rotates by 360º - corrective mode is activated).
3. Press pusher 2 to single step the center stop-second hand. Press and hold pusher 2 to advance
the center stop-second hand quickly. Press pusher 1 to advance the next hand.
4. Press pusher 2 to single step the hour counter hand. Press and hold pusher 2 to advance the
hour counter hand quickly. Press pusher 1 to advance to the next hand.
5. Press pusher 2 to single step the minute counter hand. Press and hold pusher 2 to advance the
minute counter hand quickly.
6. Return the crown to position I.
A
B
C
D
E
F
G
H
I
L
Hour hand
Minute hand
Second hand
Crown
Date
Hour counter
Center
stop-second
Minute counter
Pusher 1
(reset)
Pusher 2
(star/stop)
PLEASE NOTE :
Before using the chronograph functions, please ensure that :
- the crown is in position I (=normal position).
- the three chronograph hands are precisely at zero position following activation of pusher 1. Should this not be the case,
the position of the hands must be adjusted (see the chapter entitled “Adjusting the chronograph hands to zero position”).
Chronograph: Basic function
(Start / Stop / Reset)
1. Press pusher 2 to start the center stop-second hand.
2. To stop the timing, press pusher 2 again.
3. To reset the three chronograph hands to zero positioning, press pusher 1.
Chronograph: Intermediate or interval timing
1. Press pusher 2 to start the center stop-second hand.
2. Press pusher 1 to stop the chronograph.
NOTE: Although the chronograph hands have stopped, the movement continues
to record the current timing.
3. Make up the measured time: Press pusher 1 again and the 3 chronograph hands are quickly advanced to the ongoing
measured time. To continue to record intervals, continue to push pusher 1.
4. Press pusher 2 to stop and the final time is displayed.
5. To reset the three chronograph hands to zero positioning, press pusher 1.