Gladiator 10.0K, Руководство по эксплуатации продукта

Страница: 4 / 12

4
Ground
Connect the GND (-) of the amplifier directly to the negative terminal (-) of the battery. Use
cables 18mm.
Remote
In between the power and ground is a remote turn-on terminal. This terminal must be
connected to a sw12V source. Typically, remote turn-on leads are provided at the
head unit which will turn on and off the amplifier in correspondence with the source. If the
head unit does not have a remote turn-on lead, then a power antenna wire can be used. If
neither of these leads are present on the head unit then a sw12V supply must be
used, like the ACC, +12V.
Run the remote cable (18mm) by the side of the vehicle. Use protectors, to avoid friction
with the body of the vehicle and prevent short circuits.
SIGNAL INPUT AND GAIN SETUP
Fig.3 Low Level Input using RCA