G L A C I E R O Z O N E
6
Care for Your Glacier Ozone Generator
Proudly made in the USA
our System is manufactured in the United States by experienced technicians
using the highest quality parts and materials. When properly cared for, your
System will give you many years of excellent performance.
It is required maintenance of your System to protect the durable stainless steel cabinet
and the generator when transporting the unit. Although the cabinet is high quality
stainless steel, the machine should be kept out of the weather and as dry as possible.
Never use the system where water could get inside.
To clean your system, simply wipe the stainless steel exterior with either Stainless Steel
Magic Original Formula spray, or Professional Easy-Off Stainless Steel Cleaner &
Polish.
When required, remove the filter retainer from the intake fan guard, and remove the
fan filter. Wash with warm soapy water. When the filter is dry, replace it and the
retainer. Or, if needed, replace filter. Always operate the system with the intake fan
filter in place. Keep the power cord clean and free of chemicals and avoid kinking.
Unplug the system by pulling on the plug, not the cord. Never pick up the system by
the cord or drag the system with the cord. Always transport the system in a secure,
upright position.
USER WARNING
Always disconnect (unplug) the machine when servicing. If
you decide to service your system by cleaning or replacing any
of the lamps, prolonged direct viewing of the ultraviolet
generator(s) in the system when lit can cause temporary welding-type burns to
the eyes.
To see if the lamps come on, look indirectly for a lavender glow. If the system seems
to be low in generation, disconnect (unplug), remove cover and clean lamps: Wipe
with 70-91% Isopropyl Alcohol with paper towel and dry with a clean paper towel.
Chapter
4
Y
