Glacier bay FSUR2718B1, Инструкция по использованию и уходу

Страница: 15 / 36

Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
14
Removing the quick connector
If it is necessary to remove the quick connector (1),
squeeze the tabs (2) on the quick connector and then
pull down to disconnect.
Pull
down
Squeeze
1
1
2
Flushing and checking for leaks
Pull the hose assembly out of the spout and remove
the spray head by unscrewing it from the hose in a
counterclockwise direction. Be sure to hold the end of
the hose down into the sink and turn the faucet to
the warm position where it mixes hot and cold water.
Flush the water lines for one minute. This flushes away
any debris that could cause damage to internal parts.
Check for leaks.
Re-tighten any connections if necessary, but do not
overtighten. Reinstall the spray head by hand tightening
it back onto the spray hose in a clockwise direction.
IMPORTANT: After installation is completed, turn on the
hot and cold water supplies. Check for leaks. Do not lose
the gasket (1) in the hose.
1
Insert the faucet body (L) through the hole in the
5
Securing the faucet assembly
From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (M). Push the FastMount™ system (M)
up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise)
to tighten (Fig 1).
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
Insert the faucet body (L) through the hole in the
5
Securing the faucet assembly
From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (M). Push the FastMount™ system (M)
up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise)
to tighten (Fig 1).
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
opmount Installation (continued)
8
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Topmount Installation (continued)
8
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Topmount Installation (continued)
13
HOMEDEPOT.COM/GLACIERBAY
Undermount Installation (continued)
15
15
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installing the soap dispenser
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
into the soap assembly (O).
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)