4
Installation
1
Installing the faucet assembly
CAUTION:
Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle
to relieve water pressure and ensure that the water is completely shut off.
1b
NOTE:
This step is for escutcheon installation (optional).
If the sink is uneven, use silicone under the gasket (I).
□
Screw the bolts (H) into the escutcheon (G) and
ensure that the gasket (I) is pressed onto the
escutcheon (G) before the escutcheon (G) is
installed over the three holes in the sink.
□
Insert the faucet assembly (A) through the hole
in the escutcheon (G).
□
Secure the escutcheon (G) to the sink using the
mounting nuts (J) provided. Hand tighten only.
□
Shut off the water supply. Remove the old faucet. Clean the mounting surface.
□
Unscrew the nut (D), and remove the washers (B & C).
1a
□
Insert the faucet assembly (A) through the hole
in the sink.
NOTE:
This step is fo
r no escutcheon
installation (optional).
A
G
H
I
J
A
