8
Installation (continued)
6
Installation using the battery
pack
NOTE:
After installing the battery pack, the light on the
sensor will flash and the faucet control box will make a "click"
sound when you move your hand in the sensor area. If not,
check to ensure the batteries are installed correctly.
NOTE:
This step is for battery installation (optional). If the
battery will not be used, install as described in step 7.
□
Insert the battery pack cable (3) into the control box connection (4).
□
Drill a hole in the wall using a 6mm (15/64 in.) diamater drill bit. Install the battery pack (I) using the molly
anchor (1) and screw (2) provided.
(15/64 in.) dia.
6mm
2
I
1
3
4
1
2
