9
Installation (continued)
6
Installing the plaster guard
Place the plaster guard (L) onto the valve body (D)
and secure with the screws (K).
□
5
Flushing the water outlets
□
and checking for leaks
Remove the screw (G). Place the handle (F) on
the valve body (D) inverter and turn the handle
(F) to the full on mixed position. Turn on the hot
and cold water supply lines and allow the water
to flow from the outlets for one minute, or until
all foreign matter has been flushed out. Check
for leaks.
Shut off the water at the faucet and supply
lines. Remove the handle (F).
□
NOTE:
Be sure to position the plaster guard (L) correctly
onto the valve body (D), with the side marked "SHOWER"
facing upward.
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
D
K
L
F
D
G
