Gkit Baby Pre, Инструкция по сборке

Страница: 3 / 7

Components
The components for the GKit BabyPre have been carefully bagged and labelled to
make assembly as simple as possible. We recommend you populate the components
in order of the bag #s. Start with the resistors and move on to the taller components.
Figure 2. Diode -­‐ Polarity to follow.
-
+
Figure 3. Capacitor -­‐ Polarity to follow.
Figure 4. LED -­‐ Polarity to follow.
Figure 5. IC chip direction to follow.
Regulator heat-sink
Figure 6. Voltage Regulator orientation. Metal plate (heat sink) is at the back
where the small rectangle is located
Figure 7.
Be certain to add the extra wire between the positive (+) transformer
input jack (J1) and TP5. The wire should connect where the solid black line is
shown in the picture above.