User Manual for Mobile DVR
7
2.
Specifications
Function
Item
Description
Recording
System
Channel
1-4 channels
Resolution
Support CIF
、
HD1
、
D1 resolution, compatible with 2CH of D1 & 2CH of CIF. fps:
1 to 25f/s/ch adjustable (PAL) or 30f/s/ch (NTSC) .
Video Quality
1-4 levels, 1 is the highest level and 4 is the lowest level.
OSD
Overlays information such as date time and vehicle ID
SD card REC
Support two SD card recycle recording. Automatically switch to the other one
when the first SD card was full, and the data will be automatically overwritten .
Recording Mode
The default setting is auto recording after power on. Timed recording and alarm
recording are supported.
Preview
Support 1 channel and 4 channels preview.
Disk Data
overwritten
Support SD cards overwritten function.
Playback
System
Video Search
Search video files anytime per day, type(n/a) and target SD card.
Playback
Support 1 to 4 channels playback.
Support forward and backword play
at the speed of: x 2,x4,x8,x16.
GUI
Graphical User
Interface
Setup system parameters with the remote control.
Alarm
Input
Support up to 6 channels alarm input.
Pre-record 10 seconds ahead of the alarm.
Record duration after alarm can be set in system
Output
Support up to 1 channels alarm output, level signal.
Optional
Function
GPS
GPS module can be built-out device FB7002, the GPS info will be recorded
synchronous
;
FB7001 Support external GPS module
Network
RJ45 Ethernet port.
FB7001 and FB7002 supports several wireless modules such as 3G and WIFI
G Sensor
Built in G-sensor is available with FB7001 and FB7002
Others
Power Settings
System auto power on/off:
1,Vehicle acc on/off---system auto power on after acc on, system power off
according to the delay time (up to 240min, default 5min) after acc off.
2,Preset time---Only according to time preset table.
Power-off
protection
With the power-off protection, all data can be saved safely and the recording can
be closed normally after power failure.