Giropes 261012, Руководство пользователя

Страница: 32 / 52

EN USER’S MANUAL SCU
32
7. PARAMETERS CONFIGURATION
7.1 INTERNAL COUNTING (A/D)
7.2 CONFIGURATION OF THE WEIGHT LIMITS (SUPERIOR AND INFERIOR)
7.3 AUTO SWITCH OFF
7.4 CONFIGURATION OF THE ILLUMINATION OF THE DISPLAY
7.5 HOLD FUNCTION
7.6 RS-232 DATA EXIT
7.7 CONFIGURATION OF THE SPEED OF THE AD CONVERTER
7.8 BLIND
7.9 CONFIGURATION OF THE GRAVITY
To access the configuration of parameters when the screen is in zero, the user must press the key .
Press the key to choose the desired character (UF-1 ~ UF-11).
To go back to the previous mode press the key .
7.1 BATTERY VOLTAGE|
UF-1
1. Press the key
.
2. Press the key the screen will show the value of the voltage of the battery.
3. To exit this mode and go back, the user must press the key
7.2 CONFIGURATION OF THE LIMITS OF WEIGHT ( SUPERIOR AND INGERIOR) |
UF-2
1. Press the key to access the parameter.
2. The display will show the message “ 000.00L” ( inferior limit)
3. Use the keys to move the cursor and the key to choose the desired number..
4. Once all the digits of the lower limit have been programmed, press the key
5. The display will show the message “000.00h” (Superior limit=
Hi
)
6. Use the key to move the cursor and the key to choose the desired number.
7. Once all the digits of the high limit have been programmed, press the key
.
8. The display will show the value.
A B C
0 0 0
(configuration of the alarm)
DISPLAY VALUE ESTABILITY
A 0 There is no need to stabilize the alarm to make it ring
1 The alarm must be stabilized to ring
B 0 Always 0
C 0 Alarm switched off
1 The alarm ring if it is place on the band OK
( between the limits Lo and Hi )
LO OK HI
2 The alarm rings if it is situated below the
inferior limit Lo or above the superior limit
Hi
LO OK HI
9. Press the keys to move the cursor and the key to choose the desired number..
10. Press the key to confirm.