Withdrawing from service
50
Cod. 598144
Rev. 11/0717
15. WITHDRAWING FROM SERVICE
Removing the washer from service requires a specialised company.
Never release the washer unsecured.
To release the washer and subsequent transportation, refer to the same specifications and
cautions indicated for Installation.
When removing the machine from service:
Disconnect and mechanically lock the external switch. Remove the supply cables.
Close and mechanically lock the manual water supply valves. Remove the water supply hoses.
Disassemble the drain outlet pipe and empty any residual water left in the washing machine.
Assemble the shipping restraints.
Disassemble the door of the washing machine (consult the Authorised Technical Service).
Dismantling
Most of the machine’s components are made of recyclable or recoverable materials.
The injected pieces bear information on the materials that were used to make them.
The main materials are:
Steel plates
Stainless steel plate
Grey cast iron
Aluminium
Glass
Polypropylene (PP)
Ethylene Propylene (EPDM)
ABS
Copper
Electronic components
Management of waste from electronic devices
In compliance with Directive 2002/96/EC on the management of waste from electronic devices, it
is the obligation of the manufacturer to warn that:
The electronic components installed in the washing machine, must be dismantled and delivered
to treatment facilities authorised for this purpose.
