11
Note: If the awning extends at this point instead of retracting, press the STOP button
immediately, then remove the power supply to the motor controller for at least 10
seconds.
Next repeat steps 1, 2 and 3 above then press the OUT button on the wall switch to
complete the programming procedure.
Ensure that the awning responds correctly to the wall switch by pressing the OUT,
STOP and IN buttons alternately.
For queries or assistance with programming any remote handset to any of your G-Link
devices please call Girard Systems toll free on 800
–
382
–
8442 between 7:30am and
5:00pm P.S.T.
