QF-830-009
– sMart Vent™
Revision Level A
Girard Equipment, Inc. |
GS09086 to GS10007 (GEN. 1)
GS07980 to GS08060 (GEN. 2)
10
Installation Instructions
1) Remove valve from packaging.
2) Align the valve with the tank mount.
3) Use
Girard Equipment’s GT60002 3-in-1 combination IBC spanner wrench to
screw the sMart Vent
™ to its port.
Operation Instructions
Push sMart Vent™ cover to manually vent pressure. This safety relief valve opens and
reseats automatically.
Maintenance Instructions
Warning
: This device is under pressure that could cause injury. Do not
attempt to disassemble this device unless you have been properly
trained by a Girard Equipment representative. Follow all installation,
maintenance, and repair instructions set forth in this manual to avoid injury.
O-Ring and Gasket Maintenance
All soft goods should be replaced during regular maintenance and requalification, or if
device fails an in-service STD (Start to Discharge) pressure test.
!
6
