Gira 1288 00, Руководство по эксплуатации

Страница: 27 / 44

27
Assigning home station via floor-call button
If you cannot access the home during start-up, you can also
assign the home station via a connected floor-call button:
1. Press the "System prog." button on the control device for
3 seconds to start programming mode (see Page 19).
2. Press the call button of the home station to be assigned at
the door station for 3 seconds until you hear a short
acknowledgement tone.
3
You will hear a long acknowledgement tone.
3. Go to the floor-call button of the home station to be
assigned.
Press the floor-call button for 3 seconds until you hear a
short acknowledgement tone.
3
A long acknowledgement tone indicates successful
assignment.
4. Press the "Systemprogr." button on the control device to
exit the programming mode.
Only possible
with directly connected home station
With several parallel home stations, only the home station
connected directly to the floor-call button can be taught in via
the floor call button.