background image

4

System information

The Gira door communication system operates with the volt-
age type SELV.
In systems with video components, up to 28 home stations 
and two door stations with colour cameras can be connected 
to the 2-wire bus. 
In systems with audio components, systems with up to 
70 audio devices can be realised with certain system 
configurations, e.g. 
1 Built-in speaker with 5 add-on modules and 
68 Surface-mounted hands-free feature home station.

Depending on the system size, a maximum of 3 home stations 
can be operated in parallel per call button 

A call-tone differentiation is made between the following calls 
at the home stations:

• door call (initiated by call button)

• floor call (initiated by floor-call button)

• internal call (initiated by call button for home stations)

Cabling and cable arrangement

Cables with a wire diameter of 0.6 or 0.8 mm can be used as 
bus lines.
The following cable types are suitable for use as bus lines:

• J-Y(ST)Y (communication line)

• YR (insulated bell wiring)

• A-2Y(L)2Y (communication cable)

Planning software

An exact determination of the maximum system size is 
possible with the planning software at www.gira.de.

Cabling for new installation

We recommend communication line "J-Y(ST)Y" for new 
installations of the Gira door communication system.

Содержание 1288 00













































Отзывы: