GIRA
Info
Triple control unit 1-10 V
Installation Instructions
Triple control unit 1-10 V
10/05
Page 2 of 3
Connection
The unit is connected as shown on the opposite page.
Legend:
c
1 - 10 V control voltage
(from electronic ballast).
d
Power supply for connected ballasts.
e
Manual operation and switching state indicator
without checkback signal to Instabus EIB.
Cap
Slide the cap with the bus wires at the bottom over the
bus terminal (fig. A) until it is heard to engage.
To remove the cap, push sideways and withdraw
(fig. B).
