9
✓
An empty switching time is offered at the
end of the list if at least one switching
time is still available.
Modifying the switching time
1. Go in the program menu to the
ProG
menu item (see Page 7).
2. If a switching time exists, press the
S
button.
✓
The switching time is opened for editing,
the hour display flashes.
3. Press the
+
or
-
button in order to
modify
the
hour display.
4. Confirm with the
S
button.
5. Use the same method to carry
out the further settings. These are:
• Minutes
• Day – here the weekdays are initially displayed from Mo-Su, then the
groupings Sa-Su, Mo-Fr, Mo-Sa and Mo-Su.
• Comfort or lowering temperature
6. Confirm respectively with the
S
button.
✓
After the last confirmation with
S
the modified switching time is
saved and the chronologically next switching time is displayed.
Deleting the switching time
1. Go in the program menu to the
ProG
menu item (see Page 7).
2. Press the
+
or
-
button in order to access the desired switching time.
3. Press the
+
and
-
buttons for longer than 5 seconds.
✓
The switching time is deleted irrevocably and the chronologically next
switching time is displayed.
Deleting all switching times
With this function you can delete all stored switching times. This can, for
example, be practical when a complete changeover of the time program
is to be carried out and the deleting of individual program points is too
time-consuming.
1. Go in the program menu to the
ProG
menu item (see Page 7).
2. Select any desired switching time with
the
+
or
-
button.
3. Press the
+
and
-
buttons for longer than
10 seconds.
✓
All switching times are deleted irreversibly and a blank program point
appears with the display "--:--".
i
Grouping days
If a grouping of days is selected, a separate program point with the
specified time and the temperature step is created for each selected day
of the group.
Renewed editing of the entire grouping is not possible - only the
individual program items can be edited.
i
Note
During this procedure the factory-programmed switching times are also
deleted. These times can be restored via the reset function.
