GIRA
Info
Leak Sensor
Operating Instructions
Connecting zero-voltage contact
1. Deenergise device
2. Pull off cover
3. Replace blind plug (5) with screwed cable gland (6)
4. Insert cable through gland
5. Connect cable for zero-voltage contact to terminal block (7)
Contact via terminal 2 and 3:
Closed in case of alarm
Contact via terminal 1 and 3:
Open in case of alarm
6. Tighten gland
7. Screw on cover
Alarm test
•
Immerse sensor in water.
•
Ö
LED alarm (3) red and acoustic signal.
•
Dry sensor following contact with liquid.
Technical data
Power supply:
230 V AC / 50 Hz / 1.2 VA
Ambient temperature:
0 - 60 °C
Display Operation:
LED
green
Alarm:
LED red and acoustic signal
Zero-voltage contact:
AC 230 V/1,800 VA
DC 100 V/300 W
Construction:
Polyester housing IP 65
Protection class:
II (protective insulation)
Dimensions:
110 x 75 x 55 mm
Connection cable length:
1.5 m
Sensor cable length:
2 m
Directives/Standard
EC EMC Directive 89/336/EEC
Leak Sensor
08/96
Page: 2 of 3
