GIRA
Info
Radio-Control Presence Detector
Installation Instructions
Radio-Control Presence Detector
7/07
Page 12 of 15
Functional description
The functions of the Master key are linked with the
lightscape key last operated. The following special
functions can therefore only be executed when the
lightscape key last operated is programmed in the ac-
tuator. If this is not the case, a brief depression of the
Master key starts the light control.
Handheld:
brief depression (< 1 s) of the left /\ key (8.c)
Wall-mounted:
brief depression of key 4+ (8.d)
At first, all actuators are switched to 100 % bright-
ness, i.e. ON, thereafter the light control starts up only
with the actuator assigned to light control.
Handheld:
brief depression (< 1 s) of the right \/ key (8.e)
Wall-mounted:
brief depression of key 4- (8.f)
The lightscape is switched off and remains in this
state as long as presence is detected (e.g. slide
show). This is only possible when the lightscape key
last pressed is programmed in the actuator.
If no presence is detected and after the shut-off delay
of 2 minutes has passed, the actuator involved in light
control returns to automatic operation.
Returning to automatic is also possible by depressing
briefly a key of a programmed radio-control transmit-
ter.
8.c)
8.d)
8.e)
8.f)
Handheld:
long depression (> 1 s) of the left /\ key (8.c)
Wall-mounted:
long depression of key 4+ (8.d)
The brightness of the whole active lightscape is in-
creased (no light control).
Handheld:
long depression (> 1 s) of the right \/ key (8.e)
Wall-mounted:
long depression of key 4- (8.f)
The brightness of the whole active lightscape is re-
duced (no light control).
Important:
A brief or prolonged depression of the Master key pro-
duces no reaction when the lightscape is off.
