06
| PAIRING
OPERATION |
07
Controller assigned to port 7.
pairing your controller
The HF-2 must be paired to your PS3™ to use it wirelessly. To enable pairing, connect your controller to the
PS3™ via a USB cable and pairing will happen automatically. The pairing process can take up to 10 seconds.
Controller assigned to port 1.
The HF-2 will go into sleep mode
if not used for 10 minutes.
To wake up the controller,
press the Home button.
operation
To power on your controller, press and hold the home button for 2 seconds until a red LED appears in the
crescent. To power off your controller, press and hold the home button for 1 second.
turbo function
Pressing an action button assigned with
turbo will simulate the button being
pressed rapidly e.g. “boost firepower”.
To enable turbo function:
While pressing the Turbo button, press &
release the action button you wish to
turbo. To switch turbo off, repeat the
procedure above. NOTE: More than one
button can be assigned the turbo
function at any one time.
To clear all turbo functions:
Press & hold the Turbo button ONLY
for 12 seconds.
reassigning ports
Once paired one or two LEDs within the crescent of the controller will light
depending on which port the controller has been assigned to. To assign your
controller to a different port, go to:
Accessory Settings – Reassign Controller
and scroll to assign the controller to your desired port.
