background image

08

 | CHARGING

OPERATION | 

09

 

charging your headset

The headset contains a rechargeable Lithium-ion battery. Prior to using the headset for the first time, it is 
strongly recommended to fully charge the battery for 2 hours.

Connect the USB cable to your PS3™ (01) and insert the DC connector (02) into the headset (03). 

The LED will 

illuminate red during the charging process and will be blue when fully charged

. NOTE: Charging indication will be 

delayed for a few minutes if the headset has not been used for a long time.

operating your headset

1.  To power on your headset, press and hold the power button for 1 second until the LED flashes Blue. 

  NOTE: If the LED flashes Red only, the battery will need to be charged. A low battery is also denoted by a low 

  tone repeated every 20 seconds.

2.  To fit your headset comfortably, flex the earhook and loop it around your ear. Position the speaker in your ear 
  for optimal audio performance.

3.  To power off your headset, press and hold the power button for 1 second until the LED flashes Red.

01

charging time

Normally the battery is fully recharged 
within 3 hours. As soon as the battery 
is fully charged, the LED will be Blue. 
Disconnect the cable from the 
PS3™ and the EX-02s.

game time

The fully charged battery offers up to 
8 hours continuous use. It is advisable to 
always recharge after lengthy gameplay
so the headset is fully charged for the
next round.

adjusting volume

Tap the + button to increase the volume 
in increments until the headset reaches 
your desired volume level.

Tap the - button to decrease the volume 
in increments until the headset reaches 
your desired volume level.

 

If at any point 
the headset 
disconnects 
from the PS3™  
press lightly 
on the power 
button to 
reconnect.

muting

Press the power button briefly (less 
than 1 second) to mute the headset; 
repeat the process to un-mute. 
When in mute mode the LED will 
flash Red & Blue every 5 seconds.

 

Do not try 
to pair the 
headset to 
the console, 
when the 
headset is 
charging. If it 
is charging, 
it will not pair 
to the PS3™.

VOLUME DECREASE

VOLUME INCREASE

POWER / MUTE / RECONNECT

02

01

03

Содержание EX-02s NEXT GEN








Отзывы: