10
3.3
Pedals Installation
Attach the pedals by screwing them on to the crank.
Note, there are Left and Right pedals. Left pedal is attached to the left side crank by screwing it counter-
clockwise. Right pedal is attached to the right side crank by screwing it clockwise.
Note: Correct side stamped on the pedal edge
3.4
Seat adjustment
3.4.1
Height:
Proper saddle height occurs when your leg is at the bottom of the stroke and your leg is almost fully
extended. The knee should not lock, nor should your hips have to rock over to one side to fully depress
the pedal. There should be a natural bend in your knee, just as if you were standing. There is some
variation to this measurement; some people prefer to be slightly higher, others lower. This variation is
on the order of millimeters, never as large as centimeters and there is a generally accepted “correct”
saddle height.
Loosen quick release handle and adjust height as necessary
Right pedal
Tighten Clockwise
Left pedal
Tighten counter-clockwise
Pedal side stamp location
