Wheel Torques
9
•
Wheel Nut Thread:
M30 x 2.0
•
Wheel Nut Torque:
300 pound foot / 407 newton meter
•
Recommended wheel gun:
Paoli DP 176 ¾ inch drive
•
Ensure regulators are set for wheel guns by slowly increasing pressure, until torque wrench clicks when
undoing the nut.
•
Wheel nuts tighten to front of car
•
Wheel nuts loosen to rear of car
General Information
:
Maintenance
:
•
Wheel bearings visually inspected every 1200km,
recommended component life 3000km
•
Upright assembly visually inspected every 1200km, rebuilt
every 3000km and recommended component life 15000km
•
Clean threads and pankel mechanism every 1200 km
•
After cleaning re-grease with ZX1 or Copper grease
•
For more information refer to Ginetta G58
–
Lifing
Document
•
Information given provides an indication for servicing
and should not be treated as a guarantee
