Gin Gliders Gingo Airlite 4, Руководство пользователя

Страница: 8 / 29

5
CAUTION: Make sure that the speed
system is not too short. The front risers
of your paraglider must not be pulled
down in normal (unaccelerated) flight.
Before you fly
Make sure your dealer has checked the harness for completeness and basic settings.
Your harness must be assembled by a suitably qualified paragliding professional, for
example, your instructor.
Gin Gliders recommends that assembly be carried out in the following order. If you are
in any doubt whatsoever about this procedure, please seek professional advice from
your instructor, GIN dealer or importer.
Installing the speed system
Assemble the speed system from top to bottom. Pass the chord along the inside of
the harness and route it through the Speed pulley (1). From the pulley, route the chord
through the metal ring at the bottom edge of the seat (2). Connect the chord to the
speedbar using a secure knot (3).
1
2
3