Gin Gliders Gingo Airlite 4, Руководство пользователя

Страница: 20 / 29

17
Lateral Straps (1)
The lateral straps adjust the angle between the thighs and the back. Lengthening
the straps increases the angle and vice-versa. The easiest way to adjust them correctly
is during a flight in calm air. Remember that flying in the supine position (i.e. leaning
back), reduces the stability of the harness and increases the risk of riser twists after a
deflation.
To tighten, pull forward on the black/green loop. To loosen, pull backwards on the
red/white loop.
Seat Straps (2)
The seat straps change the depth of the seat. Adjust to find a comfortable position.
In the sitting position, lengthen the straps to their maximum at first and then use the
buckles to shorten the straps to find a comfortable position with good back support.
Lengthening the straps also helps you to slide easily into the harness at take off, while
shortening the straps helps you to be in the standing position for landing.
The webbing is not adjustable in-flight, use your first few flights to fine tune the setting
as you like.
Speed Bar
Hanging in the simulator, adjust the length of the speed bar chord so that the bar
hangs at least 15cm below the front of the harness. Making the chord too short could
result in the speed system being constantly or unintentionally engaged during flight. It
is safer to start with the speed bar a little long and shorten it following your first flights.
Test the speed bar in flight only after you are comfortable with your new harness, and
always do so in calm conditions with enough clearance above the ground.
2
1
Lateral straps
Seat strap
2
1