Clip Crossbar
ASSEMBLY MANUAL
SLIDING MOSQUITO NETTING
Once the profiles have been cut to size, insert the
brushes from the inside.
Step 1
The brush must reach the end of the butt plate at a
right angle.
Clip the crossbar to the centre of the frame with
the help of the marks on the caps and those we
have marked previously.
Step 4
Step 7
Mount the upper and lower angles to their respec-
tive profiles.
Step 2
Step 5
Step 8
Insert brushes from the outside of the profiles.
Step 3
Measure the inside opening of the mosquito screen
and mark it in the middle to place the crossbar.
Insert the rubber seal to fix the fabric.
Step 6
Step 9
Centros
Insert the studs into the plugs of the crossbar until
they protrude approximately 0.5 mm from the insi-
de and place them at the ends of the crossbar.
Cut the mosquito netting giving a surplus of 50
mm. larger than the interior hole of the frame.
