Gima OXY-10, Руководство пользователя

Страница: 20 / 164

20
ENGLISH
Instructions to User
Dear Users,
Thank you very much for purchasing our product. Please read the manual
very carefully before using this device. Failure to follow these instructions
can cause measuring abnormality or damage to the oximeter.
No part of this manual may be photocopied, reproduced or translated
into another language without the prior written consent.
We reserve the right to improve and amend it at any time without prior notice.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful inter -
ference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Version of the Manual: Ver 1.0
Revised date: November 1, 2011
All rights reserved.
Warnings

Check the device to make sure that there is no visible damage that may
affect user’s safety or measurement performance with regard to sensors
and clips. It is recommended that the device should be inspected minimally
once a week. When there is obvious damage, stop using the device.

Special attention should be paid while the oximeter is used continuously
under the ambient temperature exceeds 37°, burning hurt may occur
because of over-heating on the sensor.

An uncomfortable or painful feeling may appear if using the oximeter
continuously on the same place for a long time, especially for poor
microcirculation patients.

It is recommended that the oximeter should not be applied to the same
location for longer than 2 hours. If any abnormal condition is found, please
change the position of oximeter.

Avoid placing the device on the same limb which is wrapped with a cuff
for blood pressure measurement or during venous infusion.

DO NOT clip this device on edema or tender tissue.

The light (the infrared light is invisible) emitted from the device is harmful
to the eyes, so service technician or testee should not stare at the light.

The oximeter is not a treatment device.

When disposing of the monitor and its accessories, the local law should
be followed.