11
ENGLISH
9. MAINTENANCE
After every treatment, please use neutral detergent to clear the dust, stains on leather or the plastic cover. This is to prevent
premature aging of the leather and plastic cover.
The moving parts should be lubricated with gease periodically (at least anually)
10. CIRCUIT SYSTEM CONNECTION DIAGRAM
AC 100~120V, 50Hz/60Hz OR AC 220~240V, 50Hz/60Hz
Please check and verify products specifications before use and this manual is only used for reference. The product specifica-
tions will be subject to change or update without further notice.
11. TROUBLESHOOTING
Phenomenon
Reason
Solution
Can’t go up or down normally
1.The power cord is unconnected or not plugged
well
1. Connect the power cord or plug it well
2. Poor quality of the manual controller
2. Replace the manual control panel
3. Poor quality of the foot control switch
3. If problem is still not solved after replacing the
manual controller or foot control switch, please
contact maintenance center or supplier to
clear the trouble.
4. Poor quality of the controller box
5. Rupture of motor tail
6. Motor detonation
Abnormal sound
1. The rotating parts lack of lubricating oil
1. Add lubricating oil
2, Rotating position (such as hinge, P, O, M sets)
Lack of lubricating oil
2. Add lubricating oil
3. Motor quality problems
3. Replace the motor
Power
Back angle motor
Whole bed lifting motor
Seat cushion angle
motor
Heating system
(optional)
Hand controller
Three control
program controller
Foot controller
