22
ENGLISH
“
”: Alarm mute icon, when the icon becomes "
" , it means that the oximeter's alarm sound is disabled.
“ ”: Pulse strength bar-graph.
Lower part displays plethysmogram.
4.2 Display Screen with PI Value
On the default screen, press “
/
” Navigation key to shift screens between default screen and
display screen with PI value.
The display screen with PI value is shown below.
Figure 14 Display Screen with PI Value
4.3 Indication for No Signal
If “check probe” prompts on screen (as shown in Figure 15), please check whether the probe cable
connects well and whether the sensor is in appropriate position.
Figure 15 Check Probe Screen
4.4 Menu Setup
On the above mentioned screens, longtime press “
” key for entering into menu screen (as shown
in Figure 16).
Figure 16 Menu Screen
Screen Description
“
SETUP
”: set parameter values, refer to Chapter 4.4.1 for details.
“
UPLOAD DATA
”: enter into uploading status, refer to Chapter 4.4.2 for details.
"
DEFAULT
": enter into the factory default setting, refer to Chapter 4.4.3 for details.
“
VERSION
”: for viewing version number of the software, refer to Chapter 4.4.4 for details.
