Gilras GRK-7000 Скачать руководство пользователя

Страница: 78 / 82

-------------------------------------------------------------

Auto Ref/Keratometer GRK-7000 77

9.3. Cleaning Equipment

① The equipment should be kept as clean basically. Do not use the solvents s

uch as strongly volatile substance, thinner, benzene, etc.

② Put some soapy water to the soft cloth, and twist the water out of the cloth.

Then, polish each part of the equipment.

③ As polishing the parts of lens or glass, get rid of dusts on the surface of l

ens with wind-blower and use a dry cloth.

9.4. As changing the installation place of the equipment

Off the power switch of main body.

Take the power connection cable apart.

Lock the clamping bolt by rotating it clockwise.

Move it while maintaining the horizontality of it by holding the bottom of t

he main body.

9.5. Disposal

To dispose the instrument, accessories, and components, foll
ow local governing ordinances and recycling plans regardin
g disposal or recycling of instrument or device components.

Especially a lithium battery may pollute the environment if
the instrument or a lithium battery is abandoned.

NOTE

Содержание GRK-7000



















































































Результаты поиска

Содержание GRK-7000

Отзывы:

Похожие инструкции для GRK-7000

Бренды по названию

Популярные бренды

Gilras GRK-7000, Руководство пользователя

Результаты поиска

Содержание GRK-7000

Отзывы:

Похожие инструкции для GRK-7000

Бренды по названию

Популярные бренды