GILMAN gemeni GSO17G, Руководство пользователя

Страница: 6 / 16

6
After each operation, clean the water in the drip tray and put back to the
appliance for next use.
*For STEAM / STEAM + BAKE / AUTO-CLEAN function, there will be steam
pumping sound from the appliance and this is normal.
oPeratIon InStructIonS
Power on:
Plug into the power source to hear the “beep” sound,and press the Power button
1 - 2 seconds to switch on the appliance, the “STEAM” function icon will keep flashing.
function selection:
Rotate the “Function knob” to select the “STEAM”, “BAKE”, “STEAM+BAKE”,
“DEFROST”, “WARM” or “FERMENTATION” functions. Press the “Function knob”
once to confirm one of the function and enter into the food menu for further selection.
The appliance has default the required cooking temperature and running time for all
functons. (Except the DIY Cooking mode in “STEAM”, “BAKE” and “STEAM+BAKE”
functions) Please refer to “Function menu Temperature and Running time” section
on page 5 for details.
Press “Start” button after selected the food menu / DIY setting. Then the
appliance will start cooking.
1. 360 ˚ Hot Steam Convection
2. Makes the air to cycle in the cavity, quickly circulation.
3. It produces more even heat all over the food by air.
4. Convection Hot Steam provides faster cooking in many cases than regular radiant
types of oven and gives food a more crispy and golden colour on the surface.
After re–assembling the appliance, we recommend that you run it at the highest
temperature (230
˚
C) with “BAKE” function DIY mode for approximately 15 minutes
to eliminate any packing residue that may remain after shipping. This will also
remove all traces of odor initially present.
metHoDS of fILLInG Water tanK
1. When the water refill light indicator is flashing , fill up the water tank as
described as follow:
2. Hold the water tank handle and take out the water tank from the appliance vertically.
3. Open the water tank cover.
4. Fill the water but not fill over the Max. marking line.
5. Close the water tank cover and put the tank back to the appliance. The water
refill light indicator will go off.
note: Turn off the appliance and unplug before filling the water.
note: Fill the water before using Steam, Steam+Bake and Auto-Clean functions.